| The compact and rugged design of the
low-noise (60dB) Facit N4000 Reader/Punch Combination,
makkes it ideal in both mobile and stationary
applications. The full set of code conversions makes
N4000 fit for both telex applications, using 5 track tape
and NC-applications, for the shop floor. N4000 can punch
both 5 5 track and 8 track tapes without any manual
adjustment. Also by reading the tape width can easily be
changed. Punching is performed at a speed of up to 75
characters per second and reading at up to 500 characters
per second. N4000 is equipped with two serial ports and a
buffer of more than 9000 characters. Communication
protocols and other parameters are programmed through an
easy to use keyboard placed on the top of the machine. |
Specifications
| Punching speed | 0-75 characters per second,selectable from the program keyboard | Character seperation when reading |
Complies with ISO standards | |
| Punching accuracy | Complies with ISO standards | Tape thickness when reading | Max. 0.25 mm | |
| Number of channels | 5 - 8 channels | Tape material | Any tape with a transmissivity of up to 60% | |
| Tape widths | 5 channels: 17.5 mm
(11/16") 8 channels: 25.4 mm (1") |
Interfaces | Two seperate serial interfaces, RS232C/V.24 | |
| Tape thickness | 0.08-0.11 mm | Data buffer | Approx. 9000 character buffer, shareable between the two serial interfaces. | |
| Type of tape | ISO standardized paper tape | Protocols | Ready/Busy (hardware) and XON.XOFF (DC1/DC3) | |
| Inner diameter of tape reel | 50.8 - 52.4 mm (2") | Start/Stop-Codes | DC1/DC3 for reading and DC2/DC4 for punching | |
| Outer diameter of tape reel | Max.203 mm (8") | Code conversion | Five track Telex code, eight track ISO/EIA codes | |
| Reel capacity | Approx.300 m. Corresponds to about 120000 characters | Supply voltages | 100 - 240 V Manually switchable +15% - 10% | |
| Noise level | 30 CPS: 58.9 dB (A) | Power consumption | Max.220 W | |
| when punching | 75 CPS: 62.3 dB (A) | Dimensions: | 220x520x200 mm (8 5/8 x 20 1/2 x 7 7/8") | |
| Noise level stand by | 0 db(A) | Weight | 13.2 kg (20 lb) | |
| Reading speed | 0 - 500 characters per second, selectable from the program keyboard | |||
| Reading method | Optical | |||
| Punch feed when reading | Stepping motor and sprocket wheel |
Contact us using our online contact form, or email us direct at bob@farleighcnc.demon.co.uk Farleigh CNC Services, U.K. Telephone +44 (0)1622 728596 |